How to Fix VAN 9003 Error in Valorant – PlayerZon Blog

How to Fix VAN 9003 Error in Valorant

by Sajil Memon
128 views

VAN 9003 means Valorant’s anti-cheat, Vanguard, found that Secure Boot or TPM is not switched on in your PC. The fix is to open your BIOS, set the boot mode to UEFI, turn on Secure Boot and enable TPM 2.0, then restart and launch the game again. Steps below were checked on 17 November 2026 for Windows 11.

The whole job takes about ten minutes. You’ll need to know which key opens the BIOS on your PC, and the table in Step 2 covers the usual ones.

What does the VAN 9003 error mean in Valorant?

VAN 9003 shows up as “Secure Boot not meeting requirements”. Vanguard needs two things from your system: Secure Boot turned on and a TPM (Trusted Platform Module) that is active, and Windows 11 expects TPM 2.0. If either is off, Vanguard can’t verify your PC and Valorant refuses to start. Upgrading from Windows 10 to Windows 11 is a common trigger, because the setting may have been off all along without anything complaining.

Riot also uses VAN 9001 for the same family of problem, so these steps usually apply to both codes.

How to fix VAN 9003 step by step

Step 1: Check what your PC currently reports

  1. Press the Windows key, type msinfo32 and open System Information.
  2. In System Summary, look at BIOS Mode. It should say UEFI.
  3. Look at Secure Boot State. It should say On.
  4. Press Win+R, type tpm.msc and press Enter. A working TPM shows “The TPM is ready for use”. If it says no TPM was found, the chip is off in BIOS or your PC doesn’t have one.

If all three already look right, skip to the “If it still doesn’t work” list.

Step 2: Open the BIOS

Restart the PC and tap the BIOS key as it boots. It differs by brand, so use the one that matches yours.

Brand Usual BIOS key
Asus F2
Dell F2 or F12
HP F10
Lenovo desktop F1
Lenovo laptop F2

Other boards often use Delete or another F key. Your motherboard or laptop manual lists the exact one.

Step 3: Change the three settings

  1. Set the boot mode to UEFI and turn off CSM (Compatibility Support Module) if it is on.
  2. Find Secure Boot and set it to Enabled. On many boards it sits under System Configuration, Boot or Security.
  3. Find the TPM option and enable it. Choose TPM 2.0 if you get a choice. On many boards this is a firmware TPM setting.
  4. Save and exit, then let the PC restart into Windows.

Menu names change from one BIOS to another, so don’t worry if yours says something slightly different. Search the menus for “Secure Boot” and “TPM”.

Step 4: Check again and launch Valorant

Run msinfo32 and tpm.msc once more to confirm UEFI, Secure Boot On and a ready TPM. Then open the Riot Client and start Valorant. Vanguard may ask for a restart the first time.

If it still doesn’t work

  • Secure Boot greyed out or won’t switch on. The boot mode is usually still Legacy or CSM. Fix the boot mode first, then Secure Boot becomes available on most boards.
  • Dual-boot setup. Enabling Secure Boot can affect booting a second operating system. You can switch it back later if you need to.
  • Windows is behind on updates. Go to Settings, Windows Update, Advanced options, Optional updates and install what’s listed.
  • Compatibility mode. One guide suggests right-clicking the Valorant shortcut, opening Properties, Compatibility, ticking “Run this program in compatibility mode” and picking an earlier Windows version. Treat it as a last attempt.
  • Old hardware. If tpm.msc finds no TPM and your BIOS has no TPM option at all, the PC may simply not meet what Vanguard needs.

If you play on PC and also on mobile, our guide on playing BGMI on PC covers that side. Changing names across games is a different problem, and the post on changing your Roblox username walks through one example.

FAQ

Is VAN 9003 the same as VAN 9001?

They are closely related. Riot groups VAN 9001 and VAN 9003 together as Secure Boot and TPM problems, and the BIOS fix above is the first thing to try for either.

Do I need TPM 2.0 for Valorant?

On Windows 11, yes. Both Windows 11 and Vanguard expect TPM 2.0 and Secure Boot.

Will enabling Secure Boot delete my files?

Turning on Secure Boot in BIOS doesn’t erase your files. It can interfere with booting some second operating systems in a dual-boot setup.

Can I fix VAN 9003 without opening the BIOS?

Not if Secure Boot or TPM is off, because those switches live in the firmware. Windows updates and compatibility mode are secondary steps.

Sources

You may also like

Leave a Comment

* By using this comment form and website, you agree with the storage and handling of your data by this website.